Home  ›  Openwrt to Dd-wrt the Uploaded Image File Does Not Contain a Supported Format

Openwrt to Dd-wrt the Uploaded Image File Does Not Contain a Supported Format

Written By Tuesday, April 12, 2022 Add Comment Edit

View previous topic :: View side by side topic
Author Message
iisak
DD-WRT Novice

Joined: fourteen Dec 2007
Posts: 2
Post Posted: Fri Dec 14, 2007 fourteen:43   Post subject field: From OpenWRT to DD-WRT Reply with quote
Hi, dudes.

OK, here is the matter. I easily installed DD-WRT to my router (Linksys WRT54GL), then I wanted to exam OpenWRT and got it installed. Now the problem is, how do I install DD-WRT again to my router?

I have tried install DD-WRT firmware trough OpenWRT WWW-interface just information technology didn't piece of work.

Any ideas are more welcome.

Cheers!
Back to top View user's profile Send private message
Sponsor
confused_user
DD-WRT User

Joined: 17 Mar 2007
Posts: 347
Post Posted: Fri December fourteen, 2007 23:01   Postal service subject: Reply with quote
From OpenWrt to DD-WRT on the WRT54GL

Via OpenWrt webif GUI:

  • Goto Arrangement / Upgrade (Firmware Upgrade)
  • Download the DD-WRT dd-wrt.v24_std_generic.bin epitome to your PC.
  • Upload the dd-wrt.v24_std_generic.bin paradigm and click on the Upgrade button
  • Expect 2 minutes. The router will reboot itself automatically after the upgrade is consummate.
  • Do a hard reset and clear your browsers cache
  • Y'all are done! Access the router via DD-WRT web GUI at http://192.168.ane.1/ (username: root/password: admin)

Via mtd:

  • Transfer the DD-WRT dd-wrt.v24_std_generic.bin epitome on the router. It is important that y'all put the DD-WRT dd-wrt.v24_std_generic.bin firmware image into the ramdisk (/tmp) before y'all start flashing.
  • Rename the dd-wrt.v24_std_generic.bin image dd-wrt.v24_std_generic.trx image and flash via mtd
    Code:
    cd /tmp
    mv dd-wrt.v24_std_generic.bin dd-wrt.v24_std_generic.trx
    mtd write dd-wrt.v24_std_generic.trx linux && reboot

  • Wait two minutes. The router will reboot itself automatically later on the upgrade is consummate.
  • Exercise a hard reset and clear your browsers enshroud
  • You are done! Access the router via DD-WRT web GUI at http://192.168.ane.1/ (username: root/password: admin)

Via TFTP:

  • Enable boot_wait and set boot_time from within OpenWrt:
    Code:
    nvram set boot_wait=on
    nvram prepare boot_time=10
    nvram commit && reboot

  • Download the DD-WRT dd-wrt.v24_std_generic.bin image to your PC.
  • Unplug the router'southward power cord.
  • Connect the router'southward LAN1 port directly to your PC.
  • Configure your PC with a static IP address between 192.168.1.2 and 192.168.i.254. Due east. thousand. 192.168.1.2 (gateway and DNS is non required).
  • Execute the TFTP commands (the commands are for Linux) below:
    Code:
    tftp 192.168.1.1
    tftp> binary
    tftp> trace
    tftp> put dd-wrt.v24_std_generic.bin

  • Plug the power on and the TFTP transfer should showtime immediately
  • Look 2 minutes. The router will reboot itself automatically later on the upgrade is complete.
  • Practice a hard reset and clear your browsers cache
  • You are done! Admission the router via DD-WRT spider web GUI at http://192.168.one.one/ (username: root/countersign: admin)

Hopefully this helps some people.
Dorsum to top View user's profile Send private message Visit poster's website
iisak
DD-WRT Novice

Joined: xiv Dec 2007
Posts: two
Post Posted: Mon Dec 17, 2007 19:25   Post discipline: Cheers Reply with quote
Yeah, got it piece of work.. eventually.

Weird, just I got it work when I switched from Opera to Firefox. All though, router never restarted itself.. I had to restart information technology manually and give it 30 secs restart from back of router button.
Back to tiptop View user's profile Send private message
asbesto
DD-WRT Novice

Joined: 23 Apr 2008
Posts: 12
Post Posted: Tue Sep 27, 2011 16:12   Mail subject: Reply with quote
I confirm the same issue and the same solution: it was non working while I switched from Chrome to Iceweasel browser Wink

thanks!
Dorsum to top View user's profile Send private message
MrFidget
DD-WRT User

Joined: fifteen Jul 2010
Posts: 378
Post Posted: Wed Sep 28, 2011 21:50   Post subject: Reply with quote
In the peacock thread, it does say that there are issues loading firmware with firefox and to use something else.

I have had consequent issues with FF 3.x, iv and 5 and firmware updates

I have had success with Google Chrome v14.0.835.186 on XP

Thank you
Chris
Back to top View user's profile Send private message
GeoDave
DD-WRT Novice

Joined: 27 Nov 2011
Posts: i
Post Posted: Sun Nov 27, 2011 19:06   Postal service subject: Reply with quote
This is an old thread but since I had so much trouble getting my WRT150N v1 dorsum to DD-WRT from OpenWRT I thought information technology my duty to post. For the WRT150N v1 I have had very petty success flashing non-openwrt bins when in openwrt and I accept tried dozens of times. I was unable to find a "generic" trx file every bit noted above on the DD-WRT site. I was able to find a trx file on the Download folio of DD-WRT site which worked.

I used the following procedures to get from OpenWRT to DD-WRT on the WRT150Nv1 (every time):

1. Download a copy of PuTTY. SSH into the router suing PuTTY using the router IP accost and login to OpenWRT.
2. Execute the post-obit commands:

wget http://www.dd-wrt.com/dd-wrtv2/downloads/v24-sp1/Consumer/Linksys/WRT150N_v1/dd-wrt.v24_mini_asus.trx -O /tmp/firmware.trx

mtd -r write /tmp/firmware.trx linux
three. Allow the router to reboot.

This downloads DD-WRT mini_asus trx file into the tmp directory. Y'all can then flash your drive using the mtd command.
Back to acme View user's profile Send private message
uruiamme
DD-WRT Novice

Joined: 09 Nov 2011
Posts: 25
Post Posted: Tue Jan 17, 2017 3:53   Mail service subject: Aye Reply with quote
I just did this. Hither is my explanation on an Atheros device with TFTP:

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=1062327#1062327
Dorsum to tiptop View user's profile Send private message
Lx23RD
DD-WRT Novice

Joined: 25 Mar 2018
Posts: 1
Post Posted: Sun Mar 25, 2018 14:17   Postal service subject: From OpenWrt to DD-WRT on the TL-WDR3600 Reply with quote
Hello at that place,
I have a TP-LINK WDR3600 V.1.five with openwrt (Barrier Breaker xiv.07) installed. I would like to upgrade it with DD-WRT merely i am not sure which firmware should i use from the list: https://www.dd-wrt.com/site/support/router-database.
Please allow me likewise know which installation method is recommended in that case.
Dorsum to top View user's profile Send private message
Wildlion
DD-WRT Guru

Joined: 24 May 2016
Posts: 1246
Post Posted: Mon Mar 26, 2018 1:04   Post subject field: Reply with quote
here is a link to the latest version (it works on mine):

http://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2018/03-20-2018-r35452/tplink_tl-wdr3600v1/

read:

https://www.dd-wrt.com/wiki/index.php/Installation
Dorsum to top View user's profile Send private message
Quickybricks
DD-WRT Novice

Joined: 28 Aug 2018
Posts: ane
Post Posted: Tue Aug 28, 2018 15:08   Post subject: Reply with quote
confused_user wrote:
From OpenWrt to DD-WRT on the WRT54GL

Via OpenWrt webif GUI:

  • Goto System / Upgrade (Firmware Upgrade)
  • Download the DD-WRT dd-wrt.v24_std_generic.bin epitome to your PC.
  • Upload the dd-wrt.v24_std_generic.bin image and click on the Upgrade push
  • Wait two minutes. The router will reboot itself automatically after the upgrade is complete.
  • Do a hard reset and clear your browsers enshroud
  • You lot are washed! Access the router via DD-WRT web GUI at http://192.168.1.1/ (username: root/password: admin)

I tried this method for my wrt1200ac router, running OpenWRT and I receive the following fault.

"The uploaded image file does non contain a supported format. Brand certain that you lot cull the generic image format for your platform."

Is at that place some other file format available for the dd-wrt generic epitome?
Thanks!
Back to top View user's profile Send private message
ShakeItUp
DD-WRT Novice

Joined: 10 January 2019
Posts: 2
Post Posted: Thu Jan 10, 2019 17:53   Postal service subject: Switching From Open WRT to DD-WRT Reply with quote
Greetings,

I likewise am trying to switch from openwrt to DD-WRT.

I institute this thread using the search function.

I also get the same error.

"The uploaded image file does not contain a supported format. Brand sure that you choose the generic image format for your platform."

Why does DD-WRT not have another file format so that we tin switch?

Thanks
Back to top View user's profile Send private message
4lexO
DD-WRT Novice

Joined: 29 Mar 2019
Posts: 2
Post Posted: Mon May 06, 2019 12:50   Mail field of study: Reply with quote
Impossible to exercise it on the Linksys 3200ACM router. I had the same mistake when using the GUI :
Code:
"The uploaded paradigm file does non contain a supported format. Make sure that you choose the generic image format for your platform."

I tried with the MTD commands lines but For the terminal I have this error :

Lawmaking:
root@OpenWrt:/tmp# mtd write dd-wrt.v24_std_generic.trx linux
Could not open up mtd device: linux
Tin can't open up device for writing!

I tried the TFTP and have the fault of :

Code:
-ash: nvram: not plant

At that place is no parcel that can solve the nvram error.

CAN BE HARMFUL TO THE ROUTER.
To install DD-WRT :
I made a HARD RESET past pressing for at least 20s on the RESET push. I restarted the configuration on the OEM firmware and then installed DD-WRT.
Flash the factory-to-ddwrt.bin
Back to top View user's profile Send private message
Display posts from previous:   Page 1 of 1

olmsteadhicies90.blogspot.com

Source: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=24358

0 Response to "Openwrt to Dd-wrt the Uploaded Image File Does Not Contain a Supported Format"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel